Hi Lex,Thank you very much!I saw you posted in the Hackaday a design to print only the front panel (nosepokes and food port, Gallery | Feeding Experimentation Device 3 (FED3) | Hackaday.io) and you even had 2 colors (Gallery | Feeding Experimentation Device 3 (FED3) | Hackaday.io) so, I figured you were printing the case separated from the front. The front included the hopper. But I think these files were for the old design where the hopper disc was flat instead of angled...I wanted to know if it was possible to print the FED in 2 parts in case the mice chewed on the nose pieces and I would need to replace the fronts.Thank you so much for your help.Best,Estefania
--
You received this message because you are subscribed to the Google Groups "FEDforum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to fedforum+u...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/fedforum/b8f10bbe-8996-4222-a86d-1d0946cd76ebn%40googlegroups.com.